Click image to view full size image
Water Proof Matte Black Vinyl Wrap , High Flexible Polymeric PVC Whole Car Vinyl Wrap
Carbon firber (also known as vehicle wrapping film) is a kind of film for color changing and unique decoration specified for vehicle and plane. Vehicle wrapping film can not only be applied on vehicle, plane, etc. it can also be used for paint surface protection, vehicle decoration and digital electronics products decoration…etc.
Features for car wrap vinyl:
1) Very light, thin, but with excellent ductility and flexibility.
2) 3D graphic contrast, hi-touch embossed finish, 3D-Effect, very stylish!
3) High weather resistance to (acid rain, hailstone, heavy snow, sandstorm, etc).
4) Water proof, UV and FR.
5) Seamless for whole car wrapping.
6) Can be applied to all the common car paints.
7) The film is embossed, resembling. Reflect lights as your expectation and change highlights of the
pattern depending on the viewing angle.
8) Easy to clear with soap and water.
9) Air bubble removal. Can be dry paste!
10) High stretchable ability. Easy to apply on any surface.
11) Filter harmful light ray.
Application for car wrap vinyl:
1) Car decoration: can be dressed up car engine hood, steering wheel, empennage, trunks, any interior and
exterior surfaces of a car. Excellently meeting your expectation of unique decoration
2) Change the color of your car in 2 days completely.
3) Used for wrapping laptop, Ipad, mobile.
4) Motorcycle decoration.
Installation Tips:
1) Clean the area thoroughly. Measure and place the sticker in the desired location. Put a piece of masking tape
on the sticker to hold it in place. Hint: For best results do not install the sticker in extreme heat or cold. surface
contaminants will cause imperfections.
2) Lift the sticker up and peel the white paper backing off the sticker. Be careful not to pull the masking tape off.
3) Slowly lower the sticker and rub it in place with a scratch board or similar item. Hints: Using a soft rubber
squeegee will help smooth out bubbles and wrinkles
4) Wait a few minutes then slowly peel the clear cover off at an angle. Be very careful not to pull the sticker off
the surface. If the sticker pulls away from the surface repeat step 3.
